From: Piperw222@xxxxxxx
Date: Thu Dec 14 2000 - 22:07:41 GMT-3
Hi, If any body can help me with my prob, it would greatly be appreciated. I
can not get any sap servers broadcasted to R5. I have done a debug on r6 and
have received the follwoing {IPXSAP: positing update to 6005.ffff.ffff.ffff
via BRI0 (broadcast) (full)
IPXSAP: suppressing null update to 6005.ffff.ffff.ffff}
it seems like the broadcasts are being supressed.. The configs on r6 is as
follows: {these configs were posted from bootcamp lab 5 - r6) I think their
may be a problem with a line in access-list 901 which denys any any sap. I
can ping the ipx int on r5 from r6.
The config is listed below:
interface BRI0
ip address 172.168.65.1 255.255.255.0
encapsulation ppp
no ip route-cache
ip ospf network non-broadcast
ip ospf demand-circuit
no ip mroute-cache
ipx network 6005
no ipx route-cache
ipx watchdog-spoof
ipx spx-spoof
isdn spid1 81049306220101 4930622
isdn spid2 81049306230101 4930623
dialer map ip 172.168.65.2 name r5 broadcast 4930624
dialer map ipx 6005.00e0.b055.d43a name r5 broadcast 4930624
dialer-group 1
no cdp enable
ppp authentication chap
!
router ospf 1
network 172.168.100.6 0.0.0.0 area 10
network 172.168.60.1 0.0.0.0 area 10
network 172.168.65.1 0.0.0.0 area 10
!
router bgp 1
no synchronization
neighbor 172.168.100.5 remote-as 1
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.168.65.2 150
access-list 901 deny any any all any rip
access-list 901 deny any any all any sap
access-list 901 deny any any all any 457
access-list 901 permit any any all any all
no cdp run
!
!
ipx route default 6005.00e0.b055.d43a floating-static
!
ipx router eigrp 1
network 3650
!
!
ipx router rip
no network 3650
!
!
ipx sap 4 fserver 600.0000.0c00.1234 451 1
ipx sap 7 pserver 600.0000.0c00.1234 451 1
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx list 901
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:02 GMT-3