From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Tue Dec 12 2000 - 17:05:18 GMT-3
Explorer Firewalling is where DLSW only sends a single explorer across your
IP backbone. NetBIOS typically generates multiple explorers - the
firewalling only sends one explorer.
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Dezhong Cai [mailto:dcai@cisco.com]
Sent: Tuesday, 12 December 2000 3:32 p.m.
To: ccielab@groupstudy.com; jconnary@cisco.com
Subject: DLSW+ explorer firewall
Hi,
I got a question about DLSW explor firewall. Please see the following URL
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ibm_
c/bcprt2/bcddlsw.htm#36087
It said : Configure the dlsw timer command to enable explorer firewalls. See
the "Configuring DLSw+ Timers" section for details of the command.
There is just explanation for the "DLSW+ timers", but no detail information.
Does somebody know how to do it?
Dezhong
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:02 GMT-3