From: Minh Vu (mvu@xxxxxxxxx)
Date: Thu Dec 07 2000 - 12:58:32 GMT-3
Here is the link that have sample configuration (in IPSec section) for IPSec
Router-to-PIX, IPSec Router-to-Router, IPSec Router-to-Router with NAT,
etc....I hope this help,
http://www.cisco.com/warp/public/707/
----- Original Message -----
From: "Francis Gibbons" <francis.gibbons@globalknowledge.com>
To: "Jim Bond" <trycisco@yahoo.com>; <cisco@groupstudy.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, December 07, 2000 5:54 AM
Subject: Re: tough VPN question
> You are not NAT'ing the clients to the Domain Controller are you? I think
> you are by the fact that the branch office shares 1 IP address.
> Domain Logon can NOT be NAT'd while SMB/CIFS can be (ie map drives)
>
> Francis Gibbons
> Network Architect, CCSI, CCNP, CNE, MCSE
> Global Knowledge Network (Canada)
> Email: francis.gibbons@globalknowledge.com
> ----- Original Message -----
> From: "Jim Bond" <trycisco@yahoo.com>
> To: <cisco@groupstudy.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, December 07, 2000 1:18 AM
> Subject: tough VPN question
>
>
> > Hello,
> >
> > I'm trying to set up a IPSec between a PIX (branch
> > office) and router (central office). All PCs at branch
> > office share 1 ip address. IPSec seems to be working
> > fine because clients can ping/telnet/email/map drives
> > from/to central office. The problem is they can't
> > logon NT domain. They can ping domain controller
> > though.
> >
> > Any idea why they can't log on NT domain? (The
> > machines were already added to domain)
> >
> > Thanks in advance.
> >
> >
> > Jim
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3