Update-Source Loop0

From: Moran, Ed (morane@xxxxxxxxxxxxxx)
Date: Thu Dec 07 2000 - 01:24:40 GMT-3

• Next message: Greg Ferro: "Re: dlsw filtering..."
• Previous message: zhangxianqi: "Re: Filter explorer packet"
• Next in thread: Aaron K. Dixon: "RE: Update-Source Loop0"
• Maybe reply: Aaron K. Dixon: "RE: Update-Source Loop0"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Whenever I do this and reset BGP, the state remains in Active, but never
becomes Established. Here are the relevant configs of both internal routers.

R3
 router bgp 300
 neighbor 180.10.1.6 remote-as 300
 neighbor 180.10.1.6 update-source Loopback0
 neighbor 180.10.2.1 remote-as 100

R4
 router bgp 300
 neighbor 180.10.1.3 remote-as 300
 neighbor 180.10.1.3 update-source Loopback0
 neighbor 192.168.2.5 remote-as 500

If I remove the update-source command and reset BGP, then everything becomes
Established without a problem. Has anybody else seen this problem or have
any ideas?

E A Moran
Sr. Network Engineer
CNE,MCSE,CCNP,CCDP
TeleCommunication Systems
813-831-6353 Office
813-765-4243 Mobile

• Next message: Greg Ferro: "Re: dlsw filtering..."
• Previous message: zhangxianqi: "Re: Filter explorer packet"
• Next in thread: Aaron K. Dixon: "RE: Update-Source Loop0"
• Maybe reply: Aaron K. Dixon: "RE: Update-Source Loop0"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3