From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Thu Dec 07 2000 - 01:13:31 GMT-3
Can someone please explain the difference between prom-peer-defaults and
peer-on-demand-defaults??
In the context of a dlsw group peer wanting to filter outgoing packets so
only NETBIOS (0xF0F0 mask 0x0101) will bring up the dynamic border peer...
As per CCO :
A peer-on-demand peer is a non-configured remote-peer that was connected
because of an LLC2 session established through a border peer DLSw+ network.
A prom-peer is a peer not configured as a remote-peer on this DLSw+ device,
but which initiated a peer connection which was accepted because promiscuous
peering was enabled.
Which would you use?
When an unconfigured remote peer connects to the local group peer, it is
both a prom-peer that was not configured as a static remote AND an
unconfigured remote-peer that was established due to LLC2 packets....
???
cheers,
4 days..
Simon
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3