From: Piperw222@xxxxxxx
Date: Mon Dec 04 2000 - 20:01:59 GMT-3
Can anyone help me with my problem.. router 5 and 6 are configured for ISDN...
The configs state that the interface is configured as non broadcast. however, w
hen I pull the link from r6 as (as required) routes do not come in through bri0
) There is no OSPF adja with r5. there is however a direct link and i can ping
the directly conn bri 0 on r5. I found that on the configs attached to hardcop
y of lab requirement it shows that the link should be point -to- point ... So I
changed the bri int to point-to-point. Now I have all the routes come in throu
gh isdn when the link is pulled.. But I also have the bri int come up and down
as per (the dialer idle - timeout 60 ) I have ospf demand cir -- enabled which
supress hellos, so what is causing the bri int to come up.... The requirements
state that it should only come up when the link is cut to frame relay cloud on
r6.
Any help would be appreciated
thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:58 GMT-3