From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Mon Dec 04 2000 - 01:47:45 GMT-3
Also doesn't seem to work with 12.1(1)E.
AND before you flame me for running this - it's the only 12.1 image
that would run on my 7200 with NPE150....
Simon
-----Original Message-----
From: zheng jiang gu [mailto:zjgu@ce-air.com]
Sent: Monday, December 04, 2000 2:02 PM
To: Tony Olzak; ccielab@groupstudy.com
Subject: Re: can anyone give me a working example of bgp advertise-map
with no-exist-map?
thanks all!It will be work at any ios over 11.2 except 12.0.5T.
I think there are many bgp bugs in 12.0.5t.So take care it!!
zjgu
----- Original Message -----
From: Tony Olzak
To: zheng jiang gu ; ccielab@groupstudy.com
Sent: Monday, December 04, 2000 12:43 AM
Subject: Re: can anyone give me a working example of bgp advertise-map
with no-exist-map?
The route map in the "advertise-map" part of the command tells the
router which routes to advertise when others are down. The route map
in the "non-exist-map" section tells the router which network has to
be down in order to advertise the network in the advertise-map.
neighbor 10.1.1.1 advertise-map BACKUP non-exist-map MAIN
router bgp 3
neighbor 10.1.1.1 remote-as 6
neighbor 10.1.1.1 advertise-map BACKUP non-exist-map MAIN
route-map BACKUP permit 10
match ip address 1
route-map MAIN permit 10
match ip address 2
access-list 1 permit 192.168.2.0
access-list 2 permit 192.168.11.0
In this scenario, the router will advertise 192.168.11.0. If this
route goes down, it will advertise 192.168.2.0.
Tony
----- Original Message -----
From: zheng jiang gu
To: ccielab@groupstudy.com
Sent: Sunday, December 03, 2000 8:12 AM
Subject: can anyone give me a working example of bgp advertise-map
with no-exist-map?
I do not know how to use the command clearly
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:58 GMT-3