From: Pamela Forsyth (pforsyth@xxxxxxxxx)
Date: Fri Dec 01 2000 - 11:50:34 GMT-3
Henry,
All the information you need for SAP filtering is in the output of "show
ipx servers." The fields in the output correspond to the fields in the
access-list statements. If you're filtering on server name, remember it
is case-sensitive!
Use the network number that appears in "show ipx servers" output for your
filtering. It will not necessarily be the same physical network the
server is attached to, and in a real-world IPX network probably will not
be.
Could provide more specific hints if you provided config fragments . . .
Pamela
On Thu, 30 Nov 2000, Henry Dziewa wrote:
>
> I have a following setup:
>
> R1 connects thru ethernet to r2 and r3. They all are running ipx rip.
> There are few sap's that r1 gets from r4, i'd like to filter on these
> sap's so r2 can see only some of them and r3 can see them all.
> I tried for a while but either got too tired or simply can't figure it out.
>
> Sorry if it might be too easy, just give me some tips.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:57 GMT-3