From: yujianchun (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Wed Nov 01 2000 - 06:52:38 GMT-3
can you tell result? I wait for you.
-----Original Message-----
From: radha rani <radhaccie@hotmail.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 28 October 2000 06:43
>Hello,
> I have a very simple SRB configuration which is not working. I
>would be very grateful if someone could shed some light on this.
>
>My topology is :
>
>r1 --- ring100---r4---ring300---r3
>
>r1 and r3 are acting as hosts and have ip addresses 10.10.1.1/24 and
>10.10.1.3/24 resp. r4 is the source-route-bridge. I am unable to ping
>r1 and r3 from each other.
>
>Thanks for your help.
>
>R4's config is as follows:
>
>r4#sh run
>Building configuration...
>
>Current configuration:
>!
>version 11.2
>no service password-encrypt
>no service udp-small-server
>no service tcp-small-server
>!
>hostname r4
>!
>!
>!
>interface Serial0
>no ip address
>shutdown
>!
>interface Serial1
>no ip address
>shutdown
>!
>interface TokenRing0
>no ip address
>ring-speed 16
>source-bridge 100 1 300
>!
>interface TokenRing1
>no ip address
>ring-speed 16
>source-bridge 300 1 100
>!
>no ip classless
>!
>!
>line con 0
>line aux 0
>line vty 0 4
>login
>!
>end
>
>r4#
>
>-Radha
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:39 GMT-3