From: radha rani (radhaccie@xxxxxxxxxxx)
Date: Fri Oct 27 2000 - 19:23:16 GMT-3
Hello,
I have a very simple SRB configuration which is not working. I
would be very grateful if someone could shed some light on this.
My topology is :
r1 --- ring100---r4---ring300---r3
r1 and r3 are acting as hosts and have ip addresses 10.10.1.1/24 and
10.10.1.3/24 resp. r4 is the source-route-bridge. I am unable to ping
r1 and r3 from each other.
Thanks for your help.
R4's config is as follows:
r4#sh run
Building configuration...
Current configuration:
!
version 11.2
no service password-encrypt
no service udp-small-server
no service tcp-small-server
!
hostname r4
!
!
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
interface TokenRing0
no ip address
ring-speed 16
source-bridge 100 1 300
!
interface TokenRing1
no ip address
ring-speed 16
source-bridge 300 1 100
!
no ip classless
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
r4#
-Radha
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3