From: Vikas Gupta (vicky_gupta1803@xxxxxxxxx)
Date: Wed Oct 25 2000 - 11:45:30 GMT-3
Hi mark,
You may not be given preference in the lab!!
Vikas
--- mark salmon <masalmon@cisco.com> wrote:
> I prefer not to configure FR OSPF interfaces as
> broadcast types due to
> BDR/DR issues. My personal preference.
>
>
> I agree on the FR map. It saves a lot of headaches
> down the road.
> Vikas Gupta wrote:
> >
> > Hi Al,
> >
> > For non-broadcast, make sure that you have
> frame-relay
> > map statements to spokes. It is always good to
> have
> > frame map statements to hub as well even though
> > inverse-arp will map layer 3 addresses to DLCI.
> After
> > doing that, make sure that your hub is DR either
> by
> > setting higher priority on hub or 0 priority on
> all
> > spokes. If this doesn't work, send you configs and
> we
> > will look at it.
> >
> > Hope this helps!
> >
> > Vikas
> >
>
> Mark Salmon
> Network Support Engineer - SBC OP HQ
> Cisco Systems Inc
> 8735 W. Higgins Road Suite 300
> Chicago IL 60631
> Phone:773-695-8235
> Pager:800-365-4578
> email: masalmon@cisco.com
> Empowering The Internet Generation.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:30 GMT-3