From: mark salmon (masalmon@xxxxxxxxx)
Date: Wed Oct 25 2000 - 01:36:11 GMT-3
I prefer not to configure FR OSPF interfaces as broadcast types due to
BDR/DR issues. My personal preference.
I agree on the FR map. It saves a lot of headaches down the road.
Vikas Gupta wrote:
>
> Hi Al,
>
> For non-broadcast, make sure that you have frame-relay
> map statements to spokes. It is always good to have
> frame map statements to hub as well even though
> inverse-arp will map layer 3 addresses to DLCI. After
> doing that, make sure that your hub is DR either by
> setting higher priority on hub or 0 priority on all
> spokes. If this doesn't work, send you configs and we
> will look at it.
>
> Hope this helps!
>
> Vikas
>
Mark Salmon
Network Support Engineer - SBC OP HQ
Cisco Systems Inc
8735 W. Higgins Road Suite 300
Chicago IL 60631
Phone:773-695-8235
Pager:800-365-4578
email: masalmon@cisco.com
Empowering The Internet Generation.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3