From: Jack Heney (jheneyccie@xxxxxxxxxxx)
Date: Tue Oct 24 2000 - 12:54:39 GMT-3
How would you solve this using secondary addressing? I thought routing
updates were sourced from the primary address on the interface....If this is
the case, how will you get IGRP to advertise the routes when they have a
different length subnet mask?
Thanks,
jack
>From: "John Conzone" <jkconzone@home.com>
>Reply-To: "John Conzone" <jkconzone@home.com>
>To: "tom cheung" <tkc9789@hotmail.com>, <ccielab@groupstudy.com>
>Subject: Re: route redistribution
>Date: Tue, 24 Oct 2000 08:31:44 -0400
>
> Secondary addressing onthe link between r1 and r2,or deafult router
>and
>IP classless.
>----- Original Message -----
>From: "tom cheung" <tkc9789@hotmail.com>
>To: <ccielab@groupstudy.com>
>Sent: Monday, October 23, 2000 7:10 PM
>Subject: route redistribution
>
>
> > I'm playing with the following scenario and was unable to get
>redistribution
> > to work. Any suggestions will be appreciated.
> >
> > ospf igrp loop0
> > -----------r1------------------r2----15.15.15.15/24
> > 15.15.x.x/24 10.1.12.192/28
> > 10.1.x.x/24
> > 10.1.x.x./29
> >
> > r1 runs ospf/igrp and r2 runs only igrp. The 15.15.x.x network is
> > discontiguous. What's a good solution to solve this? Thanks.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3