From: mark salmon (masalmon@xxxxxxxxx)
Date: Mon Oct 23 2000 - 20:34:35 GMT-3
Yep. However, the loopbacks must be reachable from the remote router.
I strongly recommend using loopbacks for tunnel source (unless
prevented from doing so) Token rings interfaces make bad tunnel
sources as config changes like source bridge, etc causes the interface
to re-inialize.
> B Fridie wrote:
>
> I have the following scenario I am trying and there's not much good
> documentation on tunnels. Maybe somebody can help
>
> R1-----------------------------R2
> | |
> | |
> R3-----------------------------R4
>
> I have a tunnel going from R1 to R4. I want to source the tunnel with
> the loopbacks on R1 and R4 for redundancy. Is this possible? I can't
> get it to work.
>
> Thanks
>
>
>
>
--Mark Salmon Network Support Engineer - SBC OP HQ Cisco Systems Inc 8735 W. Higgins Road Suite 300 Chicago IL 60631 Phone:773-695-8235 Pager:800-365-4578 email: masalmon@cisco.com Empowering The Internet Generation.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3