From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Tue Oct 17 2000 - 09:45:24 GMT-3
Check your "ring frequency" this is a command under the voice port. if the
phone, and router voice port are not in sync the phone will not ring. I have
had this happen to me a few times a network when we first went live. you can
set it to 25, or 50 I can't remember which is the default.
EF
-----Original Message-----
From: dave.awatere@equant.com [mailto:dave.awatere@equant.com]
Sent: Wednesday, October 18, 2000 12:11 AM
To: ccielab@groupstudy.com
Subject: Analogue FXS connects OK but phone wont ring
Can't get the phone to ring. Call connects OK but the phone does not ring.
I
have tried the handsets in wall outlets and they ring just fine.
I also tried changing the ring frequency from 25-50 but still no go. Anyone
else seen this prob?
Cheers\Davo
Handset------FXS2/0/0___r1-------------r2___FXS2/0/0------Handset
Current configuration:
!
hostname r1
!
interface FastEthernet0/0
ip address 1.1.1.1 255.0.0.0
!
voice-port 2/0/0
cptone NZ
!
voice-port 2/0/1
cptone NZ
!
dial-peer voice 1 pots
destination-pattern 1000
port 2/0/0
!
dial-peer voice 2 voip
destination-pattern 9...
session target ipv4:1.1.1.2
!
end
Current configuration:
!
hostname r2
!
interface FastEthernet0/0
ip address 1.1.1.2 255.0.0.0
!
voice-port 2/0/0
cptone NZ
!
voice-port 2/0/1
!
dial-peer voice 1 pots
destination-pattern 9000
port 2/0/0
!
dial-peer voice 2 voip
destination-pattern 1...
session target ipv4:1.1.1.1
!
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3