From: Aaron K. Dixon (adixon@xxxxxxxxxxxxxxxxxxxxx)
Date: Thu Oct 12 2000 - 16:44:35 GMT-3
Just type the following commands under your vty and console ports.
no login
privilege-level 15
That will allow you to access the router without logging in and will also
but you at privilege level 15 so you won't need an enable password.
Regards,
Aaron K. Dixon
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jack Heney
Sent: Thursday, October 12, 2000 2:03 PM
To: ccielab@groupstudy.com
Subject: Enabling Remotely
Kind of a silly question....Is there a way to allow telnet access without
requiring any passwords (either line or enable)? Having to enable and enter
a password every time I jump from router to router from my terminal server
has started to get under my skin (I think this is an indication that I spend
too much time in my lab). I'm at the point where I'm configuring my routers
with one-letter enable passwords, but I typing that one extra character
(plus the extra carriage return) every time will be enough to push my
ever-worsening carpal tunnel syndrome to the near-fatal level. Thanks,
Jack
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:26 GMT-3