From: Lee@xxxxxxxxxx
Date: Wed Oct 11 2000 - 09:57:40 GMT-3
I need some help please. I was challenged by a colleague with the following
LANE scenario.
3620, and 2 Cat5k with LANE modules connected to LS1010. The LECS, LES/BUS,
and a LEC are running on the 3620, the LS1010 is not giving the LECS address
to the clients (setup not to)I have access to one of the cat5k and can hard
code the LECS address and make it work fine. My friend has configured the
other cat5k lane module and won't let me see the config. I get the
following message on the LECS (3620)
cause of last failure: no configuration
culprit for the last failure: 47.009181000000006070592F01.0030B6B1A810.01
Before I admit defeat to my friend (I'd rather have needles shoved into my
eyes) can someone out there give me any help? How can I determine what LECS
the cat5k lane module is trying to connect to I've tried several debug lane
xxxx maybe not the right one. Any help would be appreciated.
Thanks,
Lee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:25 GMT-3