From: Mark Lewis (markl11@xxxxxxxxxxx)
Date: Thu Sep 28 2000 - 14:25:55 GMT-3
MAY be useful (or maybe not!).
How to configure ATM on the cat LANE module without LANE (!!)
Take a simple topology like this:
R-----LS-----Cat
Config the router as per usual for a pvc to the cat (lane module) (having
set up the pvc on the ls first of course).
Then config you cat LANE module like this:
int atm0
atm VCD VPI VCI aal5snap
atm bind pvc vlan VCD VLAN#
(replacing the VCD,VPI,VCI, and VLAN#) with the appropriate numbers.
Put an ip addr. on the router, put the cat sc0 int into the vlan as
indicated by the VLAN# above, and ta-dah... you are now able to ping the cat
from the router & visa-versa!
(By the way, when I did it, I bridged through the atm int on the router to
an ip addr on a bvi (irb), but I don't see any reason it won't work if you
put the ip address directly on the atm int).
Interesting, huh?
Mark
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:08 GMT-3