From: damien (damien@xxxxxxxxxxx)
Date: Thu Sep 28 2000 - 11:09:38 GMT-3
as-prepend ia transitive attribute..........it is only used between EBGP
peers..........
----- Original Message -----
From: <abdul_rahim@ccsi.canon.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, September 27, 2000 10:44 PM
Subject: BGP As-path Prepend
> I have tried atleast 10 times and I think that as-path prepend does not
> works if we configure a route map out to another IBGP peer
>
>
> My Route-map configs on one of the IBGP peer RTA:
>
> RTA#sh route-map localpre
> route-map localpre, permit, sequence 10
> Match clauses:
> ip address (access-lists): 2
> Set clauses:
> local-preference 200
> as-path prepend 1 1
> Policy routing matches: 0 packets, 0 bytes
> route-map localpre, permit, sequence 20
> Match clauses:
> Set clauses:
> Policy routing matches: 0 packets, 0 bytes
>
> RTA#sh ip access-lists 2
> Standard IP access list 2
> permit 192.68.11.0
>
>
> The Neighbors bgp table
> RTF#b
> BGP table version is 21, local router ID is 172.16.65.1
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> *>i192.68.11.0 172.16.20.1 0 200 0 1 i
> * 192.68.5.2
0 2 1 i
>
> The Local preference got modified to 200 but It didnt add the As-paths to
> it as I configured
>
> Well It works fine If I use it between my EBGP peers
>
> Any feedbacks would be appreciated
> Thanks Abdul
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:08 GMT-3