From: abdul_rahim@xxxxxxxxxxxxxx
Date: Wed Sep 27 2000 - 19:44:53 GMT-3
I have tried atleast 10 times and I think that as-path prepend does not
works if we configure a route map out to another IBGP peer
My Route-map configs on one of the IBGP peer RTA:
RTA#sh route-map localpre
route-map localpre, permit, sequence 10
Match clauses:
ip address (access-lists): 2
Set clauses:
local-preference 200
as-path prepend 1 1
Policy routing matches: 0 packets, 0 bytes
route-map localpre, permit, sequence 20
Match clauses:
Set clauses:
Policy routing matches: 0 packets, 0 bytes
RTA#sh ip access-lists 2
Standard IP access list 2
permit 192.68.11.0
The Neighbors bgp table
RTF#b
BGP table version is 21, local router ID is 172.16.65.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>i192.68.11.0 172.16.20.1 0 200 0 1 i
* 192.68.5.2 0 2
1 i
The Local preference got modified to 200 but It didnt add the As-paths to
it as I configured
Well It works fine If I use it between my EBGP peers
Any feedbacks would be appreciated
Thanks Abdul
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:07 GMT-3