From: Wang, Zhan (zhan.wang@xxxxxxxxx)
Date: Wed Sep 27 2000 - 00:14:34 GMT-3
i think it should be OK. as i did a project before which use the Asyc leased
line from the Local Telcom, i set the two side modem in Asyc leased mode, and 1
in called , the other in answered mode. they can handshake by themself if the
leased line is fine...
Zhan
-----Original Message-----
From: Andrew [mailto:arousch@home.com]
Sent: 2000å¹´9æoe^27æ-¥ 10:17
To: ccielab@groupstudy.com
Subject: Re: AUX to AUX
What about remote back to back aux over POTS
At 09:20 PM 9/26/00 -0500, Sam Munzani wrote:
>Null modem.
>
>Sam
>----- Original Message -----
>From: "aiqun hu" <huaq@hotmail.com>
>To: <sam@munzani.com>; <jcochrane@synapse-consulting.com>;
><ccielab@groupstudy.com>
>Sent: Tuesday, September 26, 2000 8:03 PM
>Subject: Re: AUX to AUX
>
>
> > I tested in my lab before. No success. What kind of cable should I use to
> > connect the two AUX ports together? I couldn't find more info about null
> > modem cable.
> >
> > Thanks
> >
> >
> > >From: "Sam Munzani" <sam@munzani.com>
> > >Reply-To: "Sam Munzani" <sam@munzani.com>
> > >To: "James Cochrane" <jcochrane@synapse-consulting.com>,
> > ><ccielab@groupstudy.com>
> > >Subject: Re: AUX to AUX
> > >Date: Tue, 26 Sep 2000 11:13:37 -0500
> > >
> > >Add following in that config if you want dynamic routing protocols
>working
> > >in async.
> > >int async 1
> > >async default routing
> > >
> > >Then add that network in your routing protocol. e.g. eigrp 1, network
> > >xxx.xxx.xxx.xxx
> > >
> > >Sam
> > > ----- Original Message -----
> > > From: James Cochrane
> > > To: 'ccielab@groupstudy.com'
> > > Sent: Tuesday, September 26, 2000 10:31 AM
> > > Subject: RE: AUX to AUX
> > >
> > >
> > > http://www.cisco.com/warp/public/793/access_dial/auxback.html
> > >
> > >
> > > James.
> > > -----Original Message-----
> > > From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> > > Sent: 26 September 2000 16:06
> > > To: ccielab@groupstudy.com
> > > Subject: AUX to AUX
> > >
> > >
> > > Guys,
> > >
> > > Anyone have a sample config for an AUX to AUX setup?
> > >
> > >
> > > Tony
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3