From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Sep 26 2000 - 23:50:30 GMT-3
Actually, you can. Here's the url:
http://www.cisco.com/warp/public/793/access_dial/auxback.html
Brian
On Tue, 26 Sep 2000, Kevin Baumgartner wrote:
> Not possible. You need something to generate dialtone.
>
> Kevin
>
> >
> > What about remote back to back aux over POTS
> >
> > At 09:20 PM 9/26/00 -0500, Sam Munzani wrote:
> > >Null modem.
> > >
> > >Sam
> > >----- Original Message -----
> > >From: "aiqun hu" <huaq@hotmail.com>
> > >To: <sam@munzani.com>; <jcochrane@synapse-consulting.com>;
> > ><ccielab@groupstudy.com>
> > >Sent: Tuesday, September 26, 2000 8:03 PM
> > >Subject: Re: AUX to AUX
> > >
> > >
> > > > I tested in my lab before. No success. What kind of cable should I use
to
> > > > connect the two AUX ports together? I couldn't find more info about nul
l
> > > > modem cable.
> > > >
> > > > Thanks
> > > >
> > > >
> > > > >From: "Sam Munzani" <sam@munzani.com>
> > > > >Reply-To: "Sam Munzani" <sam@munzani.com>
> > > > >To: "James Cochrane" <jcochrane@synapse-consulting.com>,
> > > > ><ccielab@groupstudy.com>
> > > > >Subject: Re: AUX to AUX
> > > > >Date: Tue, 26 Sep 2000 11:13:37 -0500
> > > > >
> > > > >Add following in that config if you want dynamic routing protocols
> > >working
> > > > >in async.
> > > > >int async 1
> > > > >async default routing
> > > > >
> > > > >Then add that network in your routing protocol. e.g. eigrp 1, network
> > > > >xxx.xxx.xxx.xxx
> > > > >
> > > > >Sam
> > > > > ----- Original Message -----
> > > > > From: James Cochrane
> > > > > To: 'ccielab@groupstudy.com'
> > > > > Sent: Tuesday, September 26, 2000 10:31 AM
> > > > > Subject: RE: AUX to AUX
> > > > >
> > > > >
> > > > > http://www.cisco.com/warp/public/793/access_dial/auxback.html
> > > > >
> > > > >
> > > > > James.
> > > > > -----Original Message-----
> > > > > From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> > > > > Sent: 26 September 2000 16:06
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: AUX to AUX
> > > > >
> > > > >
> > > > > Guys,
> > > > >
> > > > > Anyone have a sample config for an AUX to AUX setup?
> > > > >
> > > > >
> > > > > Tony
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3