From: damien (damien@xxxxxxxxxxx)
Date: Mon Sep 25 2000 - 05:59:49 GMT-3
This is just a stab based on what I think is the prob....making a lot of
assumptions......... :-)
why not just overload on the Serial Interface using NAT.....then u only have
a single route to the T1 from the Internet, hence no assymetrical
routing....(assuming u have one gateway to the Internet).....
I assume the Serial Interface has a Public address here...........give some
more details....
----- Original Message -----
From: "Mike Chase" <mchase@broadcom.com>
To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Monday, September 25, 2000 4:28 AM
Subject: Proxy ?
>
> I am wondering if anyone knows how to do the following on a Cisco router.
>
> I have some Unix users who want to use SSH to get into the corporate LAN
via the
> Internet.
>
> The SSH servers however will sit in various spots in the world on our
private
> 10.x network.
>
> What I would like to do is put a Cisco router on a T1 facing the Internet
(S0/0)
> and have it proxy several port #'s on it's IP address on S0/0 (the
Internet T1),
> each of which will be mapped to represent a given SSH server on the
internal LAN
> (E0/0).
>
> I am thinking of Proxy and not NAT because if I use NAT, it will create
> asymetric routing (thus won't work) as this is not the usual path to the
> Internet which is served by a T3 out another path in the LAN.
>
> Thanks/
>
>
> Mike L. Chase
> Sr. Network Architect
> ISG: Information Services Group
> Broadcom Corporation World Headquarters, BLDG A-1050
> 16215 Alton Parkway, Irvine, California 92618-3616
> OFFICE:949-585-6057|CELL:949-283-4254|FAX:949-585-6227
> "Courage is not the absence of fear, but rather the judgment
> that something else is more important than fear."
> -- Ambrose Redmoon
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:01 GMT-3