From: Jason Dachtler (dachtler@xxxxxxxxx)
Date: Mon Sep 25 2000 - 01:28:11 GMT-3
Very expensive is an understatement. The chassis is $8K, and then it's
$8-9K for each T1/E1 card. A fully loaded rack unit (20 T1 capacity)
will run you $170K. However, it's good for bulk call generation and
voice call testing, and is one of the only call generation/switching
products I know of that will allow you to do T1 and E1 with the same
hardware.
-Jason
Carlos Patriawan wrote:
>
> you can also use Abacus from Zarak ... www.zarak.com
> But this is very expensive for lab preparation.
>
> Cheers,
>
> Carlos
>
> -----Original Message-----
> From: Jason Dachtler <dachtler@cisco.com>
> To: Ken Matwie <Ken.Matwie@telus.com>
> Cc: 'ccielab@groupstudy.com' <ccielab@groupstudy.com>
> Date: Monday, September 25, 2000 12:04 PM
> Subject: Re: ISDN simulation
>
> >Ken-
> >
> >Adtran makes an actual switch line called the Atlas. Reasonably priced
> >for an actual switch. Supports both PRI and CAS lines, as well as BRI.
> >Can also support frame relay with V.35 connections. Price for a
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:01 GMT-3