From: Konstantin Kostenko (konstantin.kostenko@xxxxxxxxxxxxxxxx)
Date: Sat Sep 23 2000 - 22:30:14 GMT-3
"Bell, Mark (Houston)" wrote:
>
> I have a router running BGP, OSPF and RIP. I am redistributing RIP into
> OSPF and then OSPF into BGP. However, the RIP network is not showing up in
> BGP. The other two networks that originate in OSPF are showing up. The RIP
> route shows up in the OSPF database and another router that is in the same
> OSPF area, so I know the RIP-to-OSPF redistribution is fine.
>
> When I go to the other router that is in the same OSPF area and BGP AS and
> redistribute OSPF from there, the RIP route shows up in BGP. Attached are
> the relevant parts of the config and other information.
Mark, your route still appears in OSPF but not in BGP.
Try to change
redistribute ospf 200 match internal external 1 external 2
statement to
redistribute ospf 200 subnets
I think the problem is in the absence of "subnets" keyword.
> Why would BGP not be redistributing this route?
>
> ----------------------------------------------
> Kenneth Mark Bell, CCNP, NNCSE
> Network Engineer II m.bell@wilcom.com
> Williams Communications Solutions
> t: (713) 307-7254 p: (713) 912-2276
>
> ------------------------------------------------------------------------
>
> bgp_prob.txtName: bgp_prob.txt
> Type: Plain Text (text/plain)
-- Konstantin Kostenko. CCNP/CCDP. Network engineer. PLANNING TECHNOLOGIES, INC.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:01 GMT-3