From: smaljure@xxxxxxxxxxxxxxxxx
Date: Wed Sep 20 2000 - 22:12:58 GMT-3
OK, you don't have to connect to the left connector, I just looked at mine
closely and found that the one on the right is just the next port. :-)
I do not know why both the "wraps" have to be enabled. Can any TR gurus help
please?
Sanjay
-----Original Message-----
From: Daniel Ji [mailto:jix@netrue.com]
Sent: Wednesday, September 20, 2000 8:54 PM
To: Greg Ferro
Cc: CCIE Lab Mailling List; Maljure, Sanjay
Subject: Re: please help on Token ring
thanks for you kind help. I got the following message and did as suggest and
fix the problem.
but I still have something not clear, why do I have to set both "wrap" to
enabled and connect to left jack of the pair, is that
MAU-manufactuer-specific(SMC Elite MAU 4016RN) or there's some theory behind
it?
Daniel
----- Original Message -----
From: "Maljure, Sanjay" <smaljure@cibernetworks.com>
To: "'Daniel Ji'" <jix@netrue.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, September 20, 2000 5:16 PM
Subject: RE: please help on Token ring
> Hi
> Set both the "wrap" buttons to enabled
> Connect the cable to the left connector (of the pair). You will notice
that
> each port on the MAU wil basically have two connectors. Connect to the
left
> connector of this pair.
> Hardcode your TR interface speed.
> Let us know if this helps
> Sanjay
----------------------------------------------------------------------------
---------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3