From: khalid siddiq (khalidsi@xxxxxxxxxxx)
Date: Fri Sep 15 2000 - 04:10:46 GMT-3
neighbor is allowed only in NBMA Networks, its not for broadcast media,
ehternet.
khalid
>From: "Barry Mersmann" <bmersmann@ebnetworks.com>
>Reply-To: "Barry Mersmann" <bmersmann@ebnetworks.com>
>To: <ccielab@groupstudy.com>
>Subject: RE: OSPF unicast updates???
>Date: Thu, 14 Sep 2000 15:08:51 -0500
>
>I'm assuming that you mean you have 4 neighbors sitting on a broadcast
>media off a single interface... you want to only establish an
>adjacency to 2 of them.
>Try making the interface a passive-interface and then specify neighbor
>statements for each router you wish to establish an adjacency to.
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Sam Munzani
>Sent: Thursday, September 14, 2000 1:41 PM
>To: Andrew; smaljure@cibernetworks.com; ccielab@groupstudy.com
>Subject: Re: OSPF unicast updates???
>
>
>Now the question is.
>If unicast is specified, will it stop multicast for
>that interface? I mean if you have 4 neighbors and you
>want to setup OSPF adj. with only 2 routers, can you
>define unicast neighbors specifically?
>
>Sam
>--- Andrew <arousch@home.com> wrote:
> > OSPF will use mcast on flooding and ucast on
> > specific requested updates. I
> > am pretty sure that static neighbors will use ucast.
> >
> > At 11:52 AM 9/14/00 -0400,
> > smaljure@cibernetworks.com wrote:
> > >Hi group,
> > >
> > >Lets say we configure neighors explicitly in the
> > ospf router process.
> > >Does this mean, OSPF will not use multicasting from
> > this point onwards and
> > >do all communications using the specified
> > unicasts?? How about for DR/BDR
> > >election process?
> > >
> > >I am going to try this now and use some debugs. I
> > will let u people know
> > >the results. Thought I would find out if somebody
> > had already spent some
> > >time on this
> > >
> > >Thanks
> > >Sanjay Maljure
> > >
> >
>
>
>=====
>Regards,
>
>Sam Munzani
>sam@munzani.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3