From: Marc Russell (mrussell@xxxxxxxxxxxxxx)
Date: Tue Sep 12 2000 - 12:00:50 GMT-3
Actually, the problem we ran into was running OSPF demand circuit across
OSPF areas via frame-relay.
Marc Russell
www.ccbootcamp.com
-----Original Message-----
From: Art Davis [mailto:senzaart@usa.net]
Sent: Tuesday, September 12, 2000 9:03 AM
To: ccielab@groupstudy.com
Subject: Re: OSPF demand-circuit over OSPF no backbone area]
Don't forget "ip ospf net (non-)broadcast."
Lachlan_Kidd@data3.com.au wrote:
Hi Rena,
I haven't tried this myself, but in the bootcamp labs, mention is
made
to the effect that it (the on demand circuit) does not work if you are
not
in area 0.
Lachlan
"aiqun hu"
<huaq@hotmail To: ccielab@groupstudy.com
.com> cc:
Sent by: Subject: OSPF
demand-circuit over
OSPF no backbone area
nobody@groups
tudy.com
12/09/00
01:35 PM
Please
respond to
"aiqun hu"
Hello guys,
Tested OSPF demand circuit in my lab. But I can't make the demand
circuit
over no backbone area(not area 0) working. Changed it to area 0, it
works!!!! Is there any specific command I should do for non backbone
area???
How about demand circuit over OSPF virtual-link? Anybody has some config
for
these two scenario? I greatly appreciate your help.
Thanks again,
Rena
Arthur Davis
Network Engineer
Altra Energy Technologies
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:55 GMT-3