From: George Spahl (georges@xxxxxxxxx)
Date: Wed Aug 30 2000 - 08:09:09 GMT-3
You may also want to take a look at the Solar Winds Tools, they're very
nice. (I'm not affiliated with them in anyway, just a satisfied customer).
George
At 11:25 PM 8/26/00 -0400, Fred Ingham wrote:
>You didn't mention what equipment you were using. Network Management
>Systems will ping all roouters at selected intervals to verify
>connectivity. If you want to do this from a PC running windows and
>Hyperterminal it can be done by setting the line delay under ASCII
>Setup to 1 or 2 seconds. Then paste in your list of addresses.
>
>You may have to experiment a little with the timing but it works.
>
>Richard_Woo@infonet.com wrote:
>>
>> All,
>>
>> Is there anyway I can do an automatic ping test for many addresses?
>> I need to ping about 200 addresses. I tried copy and paste, but the router
>> would only accept the first line. :(
>>
>> Also, what would be a good network diagram program? Currently, I am using
>> Visio for all my diagrams, but thinking about replacing it with little more
>> sophisticate program.
>> Something like AutoCAD with Network plug-ins.
>>
>> TIA
>>
>> RW
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3