From: Lawrence Dwyer (dwyer@xxxxxxxxx)
Date: Tue Aug 29 2000 - 08:55:01 GMT-3
John,
I have it working with no LECS on a production network. Since I tie into
someone else's network, I have to use their setup and they aren't using a LECS.
They only create multiple LES' and have the clients point to them by NSAP.
Larry
John Conzone wrote:
> Alan, have you ever had it working without a LECS? I've tried several
> times and even called Cisco and they told me it was required. In fact, I
> checked this with the local CCIE.
> I have some ATM lab time coming up and will test this.
> ----- Original Message -----
> From: "Alan Simpkins" <alan_simpkins@yahoo.com>
> To: "John Conzone" <jkconzone@home.com>; "Kenny Sallee"
> <mischa@worldshare.net>; "Brian Best" <bbest@bellatlantic.net>; "'Matt
> Lachberg 3'" <Cisco@datastreet.com>; "CCIE Lab List (E-mail)"
> <ccielab@groupstudy.com>
> Sent: Monday, August 28, 2000 12:21 PM
> Subject: Re: static lane question
>
> > Actually a LECS is an optional component of LANE, only
> > the LES/BUS, and Client are required. The LECS
> > function is to provide NSAP of Lane components, not
> > necessary if hardcoded in client.
> >
> >
> > --- John Conzone <jkconzone@home.com> wrote:
> > > Kenny, I guess we can go back and forth, but if
> > > you try to implememt
> > > LANE without a LECS, it won't work. Its in the RFC
> > > as well.
> > > Try it. Good luck.
-- Lawrence Dwyer, MCSE CCNA Project Officer Telemedicine Advanced Technology Research Center(301) 619-7946
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3