From: John Conzone (jkconzone@xxxxxxxx)
Date: Sat Aug 26 2000 - 10:32:04 GMT-3
See Nnanna's response to Matt.
----- Original Message -----
From: "Kenny Sallee" <mischa@worldshare.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, August 26, 2000 12:27 AM
Subject: Re: static lane question
> But if you specify the LES/BUS manually then you don't need a LECS. That
is
> the sole purpose of the LECS ( dish out the LES address ). It also
states
> in the documentation that these commands "lane server-atm-address" and
"lane
> bus-atm-address" override the automatic assignment of the LES/BUS...Are
you
> sure you have the correct ATM address for the LEC? I think you can check
> with "show atm ilmi-status"
>
> Kenny
>
> ----- Original Message -----
> From: "John Conzone" <jkconzone@home.com>
> To: "Matt Lachberg 3" <Cisco@datastreet.com>; <ccielab@groupstudy.com>
> Sent: Friday, August 25, 2000 5:36 PM
> Subject: Re: static lane question
>
>
> > Matt, you need to specify the LECS also. The LECS tells any clients
> who
> > there respective LES/BUS is from its database. You can have the switch
> > announce the LECS either with a "well know address" or with an address
you
> > configure. Or tell the client explicitly where the LECS is, which is
what
> > you want to do.
> > "lane global-lecs-address address" is the command I believe.
> >
> > ----- Original Message -----
> > From: "Matt Lachberg 3" <Cisco@datastreet.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Saturday, August 26, 2000 7:51 AM
> > Subject: static lane question
> >
> >
> > > Why do I need a LECS if I specify the client, bus, and server NSAP's
> > > manually, Why is the client stuck in Initialstate? Any clues?
> > >
> > >
> > > interface ATM0.3 multipoint
> > > ip address 10.10.30.5 255.255.255.0
> > > no ip directed-broadcast
> > > lane client-atm-address 47.0091810000000050E2058501.00000C34B43A.03
> > > lane server-atm-address 47.0091810000000050E2058501.00000C34B43B.03
> > > lane bus-atm-address 47.0091810000000050E2058501.00000C34B43C.03
> > > lane server-bus ethernet elan3
> > > lane client ethernet elan3
> > > !
> > > LE Server ATM0.3, Elan name: elan3, Admin: up, State: operational
> > > Master/Backup: Backup, Type: ethernet, Max Frame Size: 1516
> > > locally set elan-id: not set
> > > elan-id obtained from LECS: not set
> > > ATM address: 47.0091810000000050E2058501.00000C34B43B.03
> > > LECS used: 47.007900000000000000000000.00A03E000001.00 NOT yet
connected
> > >
> > >
> > > LE BUS ATM0.3, Elan name: elan3, Admin: up, State: operational
> > > Type: ethernet, Max Frame Size: 1516
> > > ATM address: 47.0091810000000050E2058501.00000C34B43C.03
> > >
> > >
> > > LE Client ATM0.3 ELAN name: elan3 Admin: up State: initialState
> > > Client ID: unassigned Next join attempt in 76 seconds
> > > Join Attempt: 27
> > > Known LE Servers: 0
> > > Last Fail Reason: Timeout on join request
> > > HW Address: 0000.0c34.b43a Type: ethernet Max Frame
Size:
> > 1516
> > > ATM Address: 47.0091810000000050E2058501.00000C34B43A.03
> > > VCD rxFrames txFrames Type ATM Address
> > > 0 0 0 configure
> > > 00.000000000000000000000000.000000000000.00
> > >
> > >
> > >
> > >
> > > Matthew Lachberg, CCNP, CCDP, MCSE
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:30 GMT-3