Re: OSPF and default route

From: Kevin M. Woods (kev@xxxxxxx)
Date: Fri Aug 25 2000 - 06:03:38 GMT-3

• Next message: pkjones@xxxxxxx: "RE: PIX firewall Conduit operator"
• Previous message: Mark Lewis: "Re: EIGRP and snapshot routing"
• Maybe in reply to: Harbir Kohli: "OSPF and default route"
• Next in thread: Christopher Van Heuveln: "Re: OSPF and default route"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Correction: This should read stub areas as opposed to just totally
stubby areas for which a non-external default LSA is used.

I also forgot about this [from draft-ietf-ospf-nssa-update-09.txt]:

    When summary routes are not imported, the default LSA originated by a
    NSSA border router into the NSSA should be a type-3 summary LSA.

So add totally stubby not-so-stubby areas to the list too.

Kevin

// All OSPF default routes are external, either a Type-5 or Type-7
// LSA, except for totally stubby area default routes.
//
// Kevin
//
// // Redistribute Static will show up as an external route.
// // Default information originate will show up as an ospf route.
// //
// // Rich Mott
// // CCIE #5234 (R&S)(ISP/Dial)
// // Internetwork Solutions Engineer
// // Thrupoint INC

• Next message: pkjones@xxxxxxx: "RE: PIX firewall Conduit operator"
• Previous message: Mark Lewis: "Re: EIGRP and snapshot routing"
• Maybe in reply to: Harbir Kohli: "OSPF and default route"
• Next in thread: Christopher Van Heuveln: "Re: OSPF and default route"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3