Re: strange request - back to back aux ports

From: David (d.ankers@xxxxxxxxxxxxxx)
Date: Thu Aug 24 2000 - 21:52:00 GMT-3

Next message: Simon Baxter: "RE: strange request - back to back aux ports"
Previous message: Simon Baxter: "RE: which one of halabi's statements is correct?"
Maybe in reply to: David: "strange request - back to back aux ports"
Next in thread: Simon Baxter: "RE: strange request - back to back aux ports"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   Damn, it actually worked the way I configured it, just that it took
   about 10 mins to come up. Went for a coffee, came back it was up / up.
   Anyway, here's the configs, is there anything missing or not required?

   R1

   interface Async1
    ip address 10.1.2.1 255.255.255.252
    encapsulation ppp
    keepalive 10
    async mode dedicated

   line aux 0
    modem InOut
    rotary 1
    transport input all
    stopbits 1
    rxspeed 38400
    txspeed 38400
    flowcontrol hardware

   R2 is exactly the same only the IPs are obviously different.

   Regards,

   David

   ----- Original Message -----

   From: David

   To: ccielab@groupstudy.com

   Sent: Friday, August 25, 2000 2:39 AM

   Subject: strange request - back to back aux ports

   Group,



   I know that it should be possible to link two 2500 routers via their
   AUX ports with PPP, anyone know how this is done? I guess a rollover
   console cable should work, is this correct?



   Regards,



   David

Next message: Simon Baxter: "RE: strange request - back to back aux ports"
Previous message: Simon Baxter: "RE: which one of halabi's statements is correct?"
Maybe in reply to: David: "strange request - back to back aux ports"
Next in thread: Simon Baxter: "RE: strange request - back to back aux ports"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3