From: Aaron DuShey (aaron.dushey@xxxxxxxxxxxxxxxxxxxxx)
Date: Thu Aug 24 2000 - 15:38:12 GMT-3
couple issues I am having-
1st of all, I am not getting any routing loops, or am I missing something
2nd-show ip route on r2 shows r2 using the ospf cloud to get to the
10.51.0.0 RIP segment, which makes sense to me because of admin distance.
r2---r6-ospf
r2-r5-10.51 segment RIP
r6-r4-10.51 segment RIP
Gateway of last resort is 137.20.20.2 to network 0.0.0.0
1.0.0.0/32 is subnetted, 1 subnets
C 1.1.1.1 is directly connected, Loopback0
137.20.0.0/24 is subnetted, 1 subnets
C 137.20.20.0 is directly connected, Loopback1
10.0.0.0/16 is subnetted, 10 subnets
O IA 10.3.0.0 [110/70] via 10.101.1.3, 00:01:31, Serial0
O IA 10.6.0.0 [110/138] via 10.101.1.3, 00:01:31, Serial0
O E2 10.22.0.0 [110/30] via 10.101.1.3, 00:01:31, Serial0
C 10.21.0.0 is directly connected, Ethernet0
O IA 10.33.0.0 [110/65] via 10.101.1.3, 00:01:31, Serial0
O E2 10.51.0.0 [110/30] via 10.101.1.3, 00:01:31, Serial0
O E2 10.65.0.0 [110/30] via 10.101.1.3, 00:01:32, Serial0
O 10.100.0.0 [110/128] via 10.101.1.3, 00:01:32, Serial0
C 10.101.0.0 is directly connected, Serial0
O E2 10.200.0.0 [110/30] via 10.101.1.3, 00:01:32, Serial0
S* 0.0.0.0/0 [1/0] via 137.20.20.2
r2#
But, on r6
although the link 10.51.0.0 is showing up, its not being chose in the
routing table, RIP is. Why?
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 137.20.20.1 1480 0x80000004 0x763F 1
10.6.0.0 10.100.1.6 1191 0x80000003 0xD43A 0
10.21.0.0 137.20.20.1 1481 0x80000004 0xBD04 0
10.22.0.0 10.100.1.6 707 0x80000003 0x14EA 0
10.51.0.0 10.100.1.6 663 0x80000001 0xBA29 0
10.65.0.0 10.100.1.6 951 0x80000003 0xEC5 0
10.100.0.0 10.100.1.6 1192 0x80000003 0x6848 0
10.101.0.0 137.20.20.1 1481 0x80000004 0xF977 0
10.200.0.0 10.100.1.6 951 0x80000003 0xB398 0
r6#
Gateway of last resort is 10.100.1.3 to network 0.0.0.0
137.20.0.0/32 is subnetted, 1 subnets
O IA 137.20.20.1 [110/129] via 10.100.1.3, Serial0/0
10.0.0.0/16 is subnetted, 10 subnets
O IA 10.3.0.0 [110/70] via 10.100.1.3, Serial0/0
C 10.6.0.0 is directly connected, Ethernet0/0
R 10.22.0.0 [120/4] via 10.65.1.2, Serial1/0
O E2 10.21.0.0 [110/30] via 10.100.1.3, Serial0/0
O IA 10.33.0.0 [110/65] via 10.100.1.3, Serial0/0
R 10.51.0.0 [120/1] via 10.65.1.2, Serial1/0
C 10.65.0.0 is directly connected, Serial1/0
C 10.100.0.0 is directly connected, Serial0/0
O 10.101.0.0 [110/128] via 10.100.1.3, Serial0/0
C 10.200.0.0 is directly connected, BRI0/0
O*E1 0.0.0.0/0 [110/328] via 10.100.1.3, Serial0/0
r6#
Aaron DuShey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3