From: Joe Harris (JoeH@xxxxxxxxxxxxxxxxx)
Date: Tue Aug 22 2000 - 11:40:47 GMT-3
Actually just change the bandwidth statement under the interface in
question. Use this if you want to change the cost for certain interfaces. If
not you have to use the "ospf auto-cost reference-bandwidth xxx" command,
but this command is used under router configuration so it will reference all
interfaces as specified by your network statements.
something like:
int e0
bandwidth <bandwidth>
then do a show ip ospf int <int> and the cost should be changed.
-----Original Message-----
From: peter brown [mailto:pita40@hotmail.com]
Sent: Tuesday, August 22, 2000 9:00 AM
To: ccielab@groupstudy.com
Subject: Cost & ospf
Does anybody have a sample config where they modified ospf cost without
using "ip ospf cost" command. I know it has to do with bandwidth
manipulation ie "ospf auto-cost reference-bandwidth xxx" where xxx is
bandwidth value. Please help.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3