From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Mon Aug 21 2000 - 22:26:30 GMT-3
Am I correct with the following?
If you were asked to build 4 queues, attach to serial 3. Each queue should
get 25% of the bandwidth. The outgoing queued packets will be evenly
sourced from 4 interfaces : int e0, int s0, int s1 and int lo0.
Would this be the config??
queue-list 3 interface Ethernet0 1
queue-list 3 interface Serial0 2
queue-list 3 interface Serial1 3
queue-list 3 interface Loopback0 4
queue-list 3 queue 1 limit 1
queue-list 3 queue 2 limit 1
queue-list 3 queue 3 limit 1
queue-list 3 queue 4 limit 1
!
int s3
custom-queue-list 3
could you also do this :
priority-list 1 interface Ethernet0 high
priority-list 1 interface Ethernet1 high
priority-list 1 interface Ethernet2 high
priority-list 1 queue-limit 1 1 1 1
!
int s0
priority-group 1
cheers.
Simon Baxter
Network Consultant
Logical Networks
simon.baxter@au.logical.com
Phone: +61 3 9522 9203
application/ms-tnef
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3