From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Mon Aug 21 2000 - 21:51:45 GMT-3
You maybe right I don't know. I have never tried configuring Framerelay SVC.
I don't believe the routers can simulate a FrameSwitch to do SVC's so I don't
know how this could be tested.
I am not going to loss a lot of sleep trying to get it to work. There are a
lot
of other things I need to practice on.
Kevin
At 10:33 AM 8/22/00 +1000, you wrote:
>Guess even if it was it's no big drama...in it's basic form that is!!
>
>-----Original Message-----
>From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
>Sent: Tuesday, August 22, 2000 10:40 AM
>To: Simon Baxter
>Cc: ccielab@groupstudy.com
>Subject: RE: Frame-Relay DE
>
>
>I guess anything is possible in the Lab but I think this would be somewhat
>unlikely.
>Plus it seems like the lab is now moving into other technologies like ATM
>and VoIP.
>
>- Kevin
>
>At 09:13 AM 8/22/00 +1000, you wrote:
> >oh yeah - hadn't used that before!
> >
> >
> >Do you know if you can emulate Q933a Frame Relay SVC switching on standard
> >IOS? Could there be any in the Lab??
> >
> >
> >Simon
> >
> >-----Original Message-----
> >From: Rogell, Dennis [mailto:Dennis_Rogell@milgo.com]
> >Sent: Tuesday, August 22, 2000 12:54 AM
> >To: Simon Baxter
> >Subject: RE: Frame-Relay DE
> >
> >
> >The de-list also lets you reference an access-list . When you do de-list 1
> >protocol ip there is a list command that allows for an access-list
> >
> >Dennis Rogell
> >
> > > -----Original Message-----
> > > From: Simon Baxter [SMTP:Simon.Baxter@au.logical.com]
> > > Sent: Monday, August 21, 2000 01:09
> > > To: Feliz, Edgar; 'Ccielab
> > > Subject: RE: Frame-Relay DE
> > >
> > > DE list.
> > >
> > > frame-relay de-list 1 protocol ip tcp telnet
> > >
> > > int s0
> > > frame de-group 1
> > >
> > >
> > > Don't know how you'd be doing it with an ACL, I though the DE list was
>the
> > > only way to set the bit!
> > >
> > > All you're doing is setting the DE bit on the frame relay packet which
>the
> > > switch 'may' chose to drop in a congested environment.
> > >
> > > Simon
> > >
> > >
> > > -----Original Message-----
> > > From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
> > > Sent: Monday, August 21, 2000 1:17 PM
> > > To: 'Ccielab
> > > Subject: Frame-Relay DE
> > >
> > >
> > > What would be a prefer method to set DE packets, to configure an
> > > access-list, or to specify the protocol you want DE as part of the
>de-list
> > > as per this statement? Why?
> > >
> > > " frame-relay de-list 1 protocol ip tcp telnet"
> > >
> > > or
> > >
> > > access-list 101 permit tcp any any eq telnet
> > >
> > > Edgar Feliz
> > >
> > > Technical Consultant
> > > <<...>>
> > > 1111 Bayhill Dr. Suite 400
> > > San Bruno, CA 94066
> > > Tel: 650-616-1145
> > > Fax: 650-616-1111
> > > Email: edgar.feliz@concert.com
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3