From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Mon Aug 21 2000 - 21:33:24 GMT-3
Guess even if it was it's no big drama...in it's basic form that is!!
-----Original Message-----
From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
Sent: Tuesday, August 22, 2000 10:40 AM
To: Simon Baxter
Cc: ccielab@groupstudy.com
Subject: RE: Frame-Relay DE
I guess anything is possible in the Lab but I think this would be somewhat
unlikely.
Plus it seems like the lab is now moving into other technologies like ATM
and VoIP.
- Kevin
At 09:13 AM 8/22/00 +1000, you wrote:
>oh yeah - hadn't used that before!
>
>
>Do you know if you can emulate Q933a Frame Relay SVC switching on standard
>IOS? Could there be any in the Lab??
>
>
>Simon
>
>-----Original Message-----
>From: Rogell, Dennis [mailto:Dennis_Rogell@milgo.com]
>Sent: Tuesday, August 22, 2000 12:54 AM
>To: Simon Baxter
>Subject: RE: Frame-Relay DE
>
>
>The de-list also lets you reference an access-list . When you do de-list 1
>protocol ip there is a list command that allows for an access-list
>
>Dennis Rogell
>
> > -----Original Message-----
> > From: Simon Baxter [SMTP:Simon.Baxter@au.logical.com]
> > Sent: Monday, August 21, 2000 01:09
> > To: Feliz, Edgar; 'Ccielab
> > Subject: RE: Frame-Relay DE
> >
> > DE list.
> >
> > frame-relay de-list 1 protocol ip tcp telnet
> >
> > int s0
> > frame de-group 1
> >
> >
> > Don't know how you'd be doing it with an ACL, I though the DE list was
the
> > only way to set the bit!
> >
> > All you're doing is setting the DE bit on the frame relay packet which
the
> > switch 'may' chose to drop in a congested environment.
> >
> > Simon
> >
> >
> > -----Original Message-----
> > From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
> > Sent: Monday, August 21, 2000 1:17 PM
> > To: 'Ccielab
> > Subject: Frame-Relay DE
> >
> >
> > What would be a prefer method to set DE packets, to configure an
> > access-list, or to specify the protocol you want DE as part of the
de-list
> > as per this statement? Why?
> >
> > " frame-relay de-list 1 protocol ip tcp telnet"
> >
> > or
> >
> > access-list 101 permit tcp any any eq telnet
> >
> > Edgar Feliz
> >
> > Technical Consultant
> > <<...>>
> > 1111 Bayhill Dr. Suite 400
> > San Bruno, CA 94066
> > Tel: 650-616-1145
> > Fax: 650-616-1111
> > Email: edgar.feliz@concert.com
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3