From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Mon Aug 21 2000 - 05:09:25 GMT-3
DE list.
frame-relay de-list 1 protocol ip tcp telnet
int s0
frame de-group 1
Don't know how you'd be doing it with an ACL, I though the DE list was the
only way to set the bit!
All you're doing is setting the DE bit on the frame relay packet which the
switch 'may' chose to drop in a congested environment.
Simon
-----Original Message-----
From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
Sent: Monday, August 21, 2000 1:17 PM
To: 'Ccielab
Subject: Frame-Relay DE
What would be a prefer method to set DE packets, to configure an
access-list, or to specify the protocol you want DE as part of the de-list
as per this statement? Why?
" frame-relay de-list 1 protocol ip tcp telnet"
or
access-list 101 permit tcp any any eq telnet
Edgar Feliz
Technical Consultant
<<...>>
1111 Bayhill Dr. Suite 400
San Bruno, CA 94066
Tel: 650-616-1145
Fax: 650-616-1111
Email: edgar.feliz@concert.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3