From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Mon Aug 21 2000 - 20:13:33 GMT-3
oh yeah - hadn't used that before!
Do you know if you can emulate Q933a Frame Relay SVC switching on standard
IOS? Could there be any in the Lab??
Simon
-----Original Message-----
From: Rogell, Dennis [mailto:Dennis_Rogell@milgo.com]
Sent: Tuesday, August 22, 2000 12:54 AM
To: Simon Baxter
Subject: RE: Frame-Relay DE
The de-list also lets you reference an access-list . When you do de-list 1
protocol ip there is a list command that allows for an access-list
Dennis Rogell
> -----Original Message-----
> From: Simon Baxter [SMTP:Simon.Baxter@au.logical.com]
> Sent: Monday, August 21, 2000 01:09
> To: Feliz, Edgar; 'Ccielab
> Subject: RE: Frame-Relay DE
>
> DE list.
>
> frame-relay de-list 1 protocol ip tcp telnet
>
> int s0
> frame de-group 1
>
>
> Don't know how you'd be doing it with an ACL, I though the DE list was the
> only way to set the bit!
>
> All you're doing is setting the DE bit on the frame relay packet which the
> switch 'may' chose to drop in a congested environment.
>
> Simon
>
>
> -----Original Message-----
> From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
> Sent: Monday, August 21, 2000 1:17 PM
> To: 'Ccielab
> Subject: Frame-Relay DE
>
>
> What would be a prefer method to set DE packets, to configure an
> access-list, or to specify the protocol you want DE as part of the de-list
> as per this statement? Why?
>
> " frame-relay de-list 1 protocol ip tcp telnet"
>
> or
>
> access-list 101 permit tcp any any eq telnet
>
> Edgar Feliz
>
> Technical Consultant
> <<...>>
> 1111 Bayhill Dr. Suite 400
> San Bruno, CA 94066
> Tel: 650-616-1145
> Fax: 650-616-1111
> Email: edgar.feliz@concert.com
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3