From: Brian S turner (brian@xxxxxxxxxxxxxxxxx)
Date: Sat Aug 19 2000 - 15:02:43 GMT-3
You cannot do lane without a SWITCH...
It uses Switched Virtual Circuits.. You have to have Call Setup and
Call Tear down signals that the routers expect to exchange with a switch
not with Each other.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
aiqun hu
Sent: Friday, August 18, 2000 9:24 PM
To: justin_fu@ringline.com.tw; ccielab@groupstudy.com
Subject: Re: ATM ack to back connections
But can I do LANE with these kind of back to back connection?
Thx
>From: "Justin Fu" <justin_fu@ringline.com.tw>
>To: "aiqun hu" <huaq@hotmail.com>
>Subject: Re: ATN back to back connections
>Date: Sat, 19 Aug 2000 09:54:09 +0800
>
>Hello,
> All u need is to verify ur clock setting in ur ATM physical layer.
>ie.
>u have to set "atm clock internal" in the physical interface of one router.
>Rgds,
>Justin Fu
>----- Original Message -----
>From: "aiqun hu" <huaq@hotmail.com>
>To: <ccielab@groupstudy.com>
>Sent: Saturday, August 19, 2000 8:08 AM
>Subject: ATN back to back connections
>
>
> > Hi guys,
> >
> > If i just have two 4500 with DS3 Cards, can I do ATM lab practise
>without
> > ATM LS1010? If so, what kind of cables do I need for this ATM back to
>back
> > connection? Anyhting I miss without LS1010?
> >
> > Thanks for your reply.
> >
> > Rena
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3