From: Brian S turner (brian@xxxxxxxxxxxxxxxxx)
Date: Sat Aug 19 2000 - 14:58:23 GMT-3
All commands that you don't have in usermode, require Level 15 privilege.
Level 2-14 are user definable.
Basically if it is a Privi level command and you want to give it to someone
that doesn't have privilege level 15, you have to change that command from
15 to whatever level you plan on giving that person.
Brian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sheref Mohamed
Sent: Friday, August 18, 2000 11:43 AM
To: Christopher Van Heuveln; Andy Singh
Cc: 'ccielab@groupstudy.com'
Subject: Re: enable mode command
So is there is way that you can tell which level
you need for each command !
Thanks
S.
--- Christopher Van Heuveln <cvanheuv@cisco.com>
wrote:
>
>
> priv exec lev 1 clear line
>
>
> "clear line" only requires level 1 privileges after
> this.
>
>
> Chris
>
>
>
> On Tue, Aug 15, 2000 at 04:25:14PM -0700, Andy Singh
> wrote:
> > Is there a way allow some1 to use "clear line"
> command without giving them
> > the enable password.
> > any pointers/configs be appreciated.
> >
> > andy singh
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3