From: Stylen (globalfx@xxxxxxxxxxxxxx)
Date: Fri Aug 18 2000 - 18:51:48 GMT-3
Actually, heres kinda what my topology is:
EIGRP---ASBR---OSPF Area 2---ABR---OSPF area 0---ABR---OSPF Area
1---ASBR---EIGRP
Now i have several subnets of 192.168.5.0
These are in the EIGRP Cloud to the left
192.168.5.229/30
192.168.5.233/30
These are in Area 2
192.168.5.33/27
192.168.5.65/27
192.168.5.97/27
192.168.5.129/27
Now the EIGRP routes are redist into the OSPF cloud as External
routes. By the way Area 2 is NSSA. At the ABR for Area 2 i have "area
2 range 192.168.5.0 255.255.255.0" configured. The routes which
originate in area 2 dont show up in the Backbone which is correct. But
the two routes from the Eigrp cloud show up in the backbone, which i
dont want. The summary address command would be correct, however this
command is used on the ASBR and I cant use that beacuse i have other
192.168.5.x routes in the OSPF cloud. I know this is a design FUBAR,
however im doing it in my home lab as practice.
Richard Foltz, CCNP, CCDP, MCSE+I, Network+, A+
Technical Solutions Consultant
Sprint ENS
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3