From: Geatti (geatti@xxxxxxxx)
Date: Thu Aug 17 2000 - 16:38:15 GMT-3
I have a simple set up with two PCs at opposite ends of a dlsw session.
Server-----to0(R6)s0----------------s0(r3)to0-----Laptop
I have a DLSW session between R6 and R3, source-route on the both tokenring
interfaces everything works great.
My confusion is that I keep seeing between 2 and three IP address under
netbios name when I do a 'show dlsw reachability'.
I can see my regular netbios names of my PCs but also these IPs. The
stranger thing still is that they constantly change every second or so.
Below I include output of the 'sh dlsw reach' command twice, spaced a couple
of seconds between each other. Again the IPs are not constant, always
changing.
R6#sh dlsw reach
DLSw MAC address reachability cache list
Mac Addr status Loc. peer/port rif
0000.f641.fcee FOUND LOCAL P000-S000 06B0.03C6.0420
0020.aff3.66e8 FOUND REMOTE 138.8.3.3(2065)
DLSw NetBIOS Name reachability cache list
NetBIOS Name status Loc. peer/port rif
213.64.163.4 SEARCHING LOCAL
213.64.163.5 SEARCHING LOCAL
213.64.163.6 SEARCHING LOCAL
LAPTOP FOUND REMOTE 138.8.3.3(2065)
SERVER FOUND LOCAL P000-S000 06B0.03C6.0420
R6#sh dlsw reach
DLSw MAC address reachability cache list
Mac Addr status Loc. peer/port rif
0000.f641.fcee FOUND LOCAL P000-S000 06B0.03C6.0420
0020.aff3.66e8 FOUND REMOTE 138.8.3.3(2065)
DLSw NetBIOS Name reachability cache list
NetBIOS Name status Loc. peer/port rif
213.64.163.6 SEARCHING LOCAL
213.64.163.7 SEARCHING LOCAL
LAPTOP FOUND REMOTE 138.8.3.3(2065)
SERVER FOUND LOCAL P000-S000 06B0.03C6.0420
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3