From: yujianchun (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Thu Aug 17 2000 - 02:04:23 GMT-3
hi,
I don't find command "bridge-group 1" in router R5
-----Original Message-----
From: Tom Winters <tjwinter@sprintparanet.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 17 August 2000 02:40
Subject: ipx bridging
>Having some problems with ipx bridging. The setup is;
>R5----R1----R7
>Currently doing irb on R5 and bridging on R1, R5 can ip ping
>R7. R5 BVI is set to IPX network 2 R7 is also set to IPX
>network 2. I have tried having no IPX routing and IPX
>routing on R1 w/o success. Any suggestions?
>
>R1 config;
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname r1
>!
>no logging console
>enable password cisco
>!
>ip subnet-zero
>no ip domain-lookup
>ip host r2 2001 200.200.200.1
>!
>!
>!
>interface Loopback0
> ip address 200.200.200.1 255.255.255.0
> no ip directed-broadcast
>!
>interface Ethernet0
> ip address 24.131.152.176 255.255.255.0
> ip access-group 5 in
> no ip unreachables
> no ip directed-broadcast
> no ip proxy-arp
> no cdp enable
>!
>interface Serial0
> ip address 137.20.2.2 255.255.255.0
> no ip directed-broadcast
> ip ospf message-digest-key 1 md5 cisco
> no ip mroute-cache
> no fair-queue
> clockrate 1000000
> bridge-group 1
>!
>interface Serial1
> ip address 137.20.3.1 255.255.255.0
> no ip directed-broadcast
> bridge-group 1
>!
>router ospf 1
> area 2 authentication message-digest
> summary-address 160.0.0.0 224.0.0.0
> redistribute connected subnets tag 3 route-map ospf
> redistribute bgp 2 subnets tag 1 route-map redis
> network 137.20.2.0 0.0.0.255 area 2
> network 200.200.200.0 0.0.0.255 area 2
>!
>router bgp 2
> no synchronization
> network 137.20.2.0 mask 255.255.255.0
> network 200.200.200.0
> neighbor 137.20.1.2 remote-as 2
> neighbor 137.20.1.2 route-reflector-client
> neighbor 137.20.3.2 remote-as 3
> neighbor 137.20.3.2 update-source Loopback0
> neighbor 137.20.3.2 default-originate
> neighbor 137.20.17.2 remote-as 2
> neighbor 137.20.17.2 route-reflector-client
> no auto-summary
>!
>ip classless
>ip route 24.0.0.0 255.0.0.0 24.131.152.1
>ip route 137.20.40.0 255.255.255.0 Serial0
>!
>access-list 1 permit 137.20.3.0 0.0.0.255
>access-list 1 permit 172.168.70.0 0.0.0.255
>access-list 1 permit 160.0.0.0 31.255.255.255
>access-list 2 permit 137.20.3.0 0.0.0.255
>access-list 3 permit 137.20.17.0 0.0.0.255
>access-list 4 permit 137.20.17.3
>access-list 4 permit 137.20.40.17
>access-list 5 permit 24.131.128.0 0.0.0.255
>route-map ospf permit 10
> match ip address 2
>!
>route-map redis permit 10
> match ip address 1
> set metric-type type-1
>!
>!
>snmp-server community secret RW 4
>snmp-server community public RO 3
>snmp-server trap-source Ethernet0
>snmp-server enable traps config
>snmp-server host 137.20.40.17 traps secret
>bridge 1 protocol ieee
>!
>line con 0
> exec-timeout 0 0
> transport input none
>line aux 0
> exec-timeout 0 0
> transport preferred telnet
> transport input telnet
> stopbits 1
>line vty 0 4
> exec-timeout 0 0
> no login
>!
>end
>
>R5 config;
>
>Current configuration:
>!
>version 11.3
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname r5
>!
>enable password cisco
>!
>ip subnet-zero
>no ip domain-lookup
>ip host r6 2001 137.20.9.1
>ipx routing 0000.0000.0005
>ipx internal-network F5
>isdn switch-type basic-ni1
>!
>!
>interface Loopback0
> ip address 137.20.9.1 255.255.255.0
>!
>interface Serial0
> no ip address
> encapsulation frame-relay
> clockrate 1000000
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
>!
>interface Serial0.1 multipoint
> ip address 137.20.1.1 255.255.255.224
> ip ospf priority 100
> frame-relay map ip 137.20.1.2 502 broadcast
> frame-relay interface-dlci 502
>!
>interface Serial0.2 multipoint
> ip address 137.20.100.1 255.255.255.240
> frame-relay map ip 137.20.100.2 504 broadcast
> frame-relay interface-dlci 504
>!
>interface Serial1
> ip unnumbered BVI1
> ip ospf message-digest-key 1 md5 cisco
> ip ospf priority 100
>!
>interface TokenRing0
> no ip address
> shutdown
>!
>interface BRI0
> ip address 137.20.17.1 255.255.240.0
> dialer map ip 137.20.17.2 name r6 broadcast 8358662
> dialer-group 1
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
>!
>interface BVI1
> ip address 137.20.2.1 255.255.255.0
> ip ospf message-digest-key 1 md5 cisco
> ip ospf priority 100
> ipx network 2
>!
>router ospf 1
> summary-address 137.20.2.0 255.255.255.0
> redistribute igrp 1 metric 100 metric-type 1 subnets
> network 137.20.1.0 0.0.0.31 area 1
> network 137.20.2.0 0.0.0.255 area 2
> network 137.20.16.0 0.0.15.255 area 0
> neighbor 137.20.1.2 priority 1
> area 1 virtual-link 200.200.100.1
> area 2 authentication message-digest
> area 2 range 137.20.2.0 255.255.255.0
>!
>router igrp 1
> redistribute ospf 1 match internal external 1 external 2
>nssa-external 1 nssa-external 2
> passive-interface BRI0
> network 137.20.0.0
> neighbor 137.20.100.2
> no default-information out
> default-metric 1544 0 255 1 1500
>!
>ip classless
>!
>no logging console
>access-list 100 permit ospf any any
>access-list 100 permit tcp any eq bgp any gt 1024
>access-list 100 permit icmp any any
>access-list 100 permit tcp host 137.20.3.2 gt 1024 host
>137.20.10.1 eq telnet
>access-list 100 permit tcp host 137.20.3.2 gt 1024 host
>172.168.80.1 eq telnet
>access-list 100 permit tcp host 137.20.2.2 eq telnet host
>137.20.2.1 gt 1024
>access-list 100 deny ip any any log
>dialer-list 1 protocol ip permit
>!
>!
>!
>tftp-server flash /c2500-ds-l.113-11a.bin
>bridge irb
>bridge 1 protocol ieee
> bridge 1 route ipx
>!
>line con 0
> exec-timeout 0 0
>line aux 0
> exec-timeout 0 0
> transport preferred telnet
> transport input telnet
> stopbits 1
>line vty 0 4
> exec-timeout 0 0
> no login
>!
>end
>
>Thanks,
>
>Tom Winters
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3