From: Kenneth Sacca (ksacca@xxxxxxxxx)
Date: Wed Aug 16 2000 - 15:16:12 GMT-3
R1:
username R2 password cisco
int bri0
ppp auth pap
ppp pap sent-username R1 password cisco
R2:
username R1 password cisco
int bri0
ppp auth pap
ppp pap sent-username R2 password cisco
Brian S turner wrote:
>
> I cannot find any links on cisco's websight that give examples or describe
> what you need
> to do to configure PAP.
>
> I had my ISDN working.
>
> I added
>
> username r3 password cisco
> username r6 password cisco
> ppp authent pap
>
> here is the message I get now when I ping across the link...
>
> r6#ping 2.0.0.3
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 2.0.0.3, timeout is 2 seconds:
>
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> BR0:1 PPP: Treating connection as a callout.
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> BR0:1 PPP: Treating connection as a callout.
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> BR0:1 PPP: Treating connection as a callout.
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> BR0:1 PPP: Treating connection as a callout.
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> BR0:1 PPP: Treating connection as a callout.
> Success rate is 0 percent (0/5)
> r6#
> %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358662 , call
> lasted 2 seconds
> %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>
> When I change ppp auth pap to ppp auth chap it works great...
>
> Here are my configs... Please help me.... I don't have any experience with
> pap.
>
> R3
>
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname r3
> !
> enable password cisco
> !
> username r3 password 0 cisco
> username r6 password 0 cisco
> ip subnet-zero
> ip tcp synwait-time 5
> no ip domain-lookup
> isdn switch-type basic-ni1
> !
> interface Loopback0
> ip address 10.3.1.1 255.255.0.0
> !
> interface Loopback1
> ip address 14.3.3.3 255.255.255.0
> !
> interface Loopback2
> ip address 14.4.4.4 255.255.255.0
> !
> interface Serial0
> ip address 10.10.1.3 255.255.0.0
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> ip ospf priority 0
> no fair-queue
> frame-relay map ip 10.10.1.1 301 broadcast
> frame-relay map ip 10.10.1.5 301 broadcast
> frame-relay lmi-type ansi
> !
> interface Serial1
> ip address 173.168.40.1 255.255.255.0
> clockrate 2000000
> !
> interface TokenRing0
> no ip address
> shutdown
> ring-speed 16
> !
> interface BRI0
> ip address 2.0.0.3 255.0.0.0
> encapsulation ppp
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> dialer map ip 2.0.0.6 name r6 broadcast 8358661
> dialer-group 1
> no fair-queue
> ppp authentication pap
> !
> router ospf 100
> redistribute static metric 500 metric-type 1
> network 10.10.0.0 0.0.255.255 area 0
> network 14.0.0.0 0.255.255.255 area 33
> default-information originate metric 500 metric-type 1
> area 33 range 14.0.0.0 255.0.0.0
> !
> router bgp 1
> neighbor 10.10.1.1 remote-as 2
> neighbor 10.10.1.1 ebgp-multihop 255
> neighbor 10.10.1.1 update-source Loopback0
> neighbor 173.168.40.2 remote-as 1
> neighbor 173.168.40.2 update-source Loopback0
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 173.168.40.2
> ip bgp-community new-format
> !
> dialer-list 1 protocol ip permit
> privilege exec level 10 clear
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> password cisco
> line aux 0
> line vty 0 4
> login
> !
> end
>
> R6
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname r6
> !
> enable password cisco
> !
> username r3 password 0 cisco
> username r6 password 0 cisco
> ip subnet-zero
> ip tcp synwait-time 5
> no ip domain-lookup
> isdn switch-type basic-ni1
> !
> interface Serial0
> ip address 12.2.1.1 255.255.0.0
> ip ospf message-digest-key 1 md5 cisco
> bandwidth 2000
> no fair-queue
> clockrate 2000000
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface TokenRing0
> ip address 11.1.1.6 255.255.0.0
> ring-speed 16
> !
> interface BRI0
> ip address 2.0.0.6 255.0.0.0
> encapsulation ppp
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> dialer map ip 2.0.0.3 name r3 broadcast 8358662
> dialer-group 1
> no fair-queue
> ppp authentication pap
> !
> router ospf 101
> network 12.2.0.0 0.0.255.255 area 0
> default-information originate always metric 20
> area 0 authentication message-digest
> !
> router bgp 3
> no synchronization
> redistribute ospf 101 match internal external 1 external 2
> neighbor 11.1.1.5 remote-as 2
> neighbor 11.1.1.5 route-map localpref in
> neighbor 12.2.1.2 remote-as 3
> neighbor 12.2.1.2 password cisco
> no auto-summary
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 11.1.1.5
> ip route 2.0.0.3 255.255.255.255 BRI0
> ip bgp-community new-format
> route-map localpref permit 10
> set local-preference 300
> !
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> password cisco
> line aux 0
> line vty 0 4
> login
> !
> end
>
> Brian
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:26 GMT-3