From: Frye, Gary (Gary.Frye@xxxxxxxxxxxxx)
Date: Wed Aug 16 2000 - 15:21:02 GMT-3
Try this instead:
ppp pap sent-username [username] password [password]
ie.
ppp pap sent-username r3 password cisco
Gary Frye, Team34 - Network Services
> Phone: (704) 427-0564
> Pager: (800) 504-8567
> Fax: (704) 590-7477
> gary.frye@getronics.com
-----Original Message-----
From: Gary Frye [mailto:gfrye@carolina.rr.com]
Sent: Wednesday, August 16, 2000 2:15 PM
To: gary.frye@getronics.com
Subject: PAP... HELP!
I cannot find any links on cisco's websight that give examples or describe
what you need
to do to configure PAP.
I had my ISDN working.
I added
username r3 password cisco
username r6 password cisco
ppp authent pap
here is the message I get now when I ping across the link...
r6#ping 2.0.0.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.0.0.3, timeout is 2 seconds:
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BR0:1 PPP: Treating connection as a callout.
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BR0:1 PPP: Treating connection as a callout.
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BR0:1 PPP: Treating connection as a callout.
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BR0:1 PPP: Treating connection as a callout.
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BR0:1 PPP: Treating connection as a callout.
Success rate is 0 percent (0/5)
r6#
%ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358662 , call
lasted 2 seconds
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
When I change ppp auth pap to ppp auth chap it works great...
Here are my configs... Please help me.... I don't have any experience with
pap.
R3
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r3
!
enable password cisco
!
username r3 password 0 cisco
username r6 password 0 cisco
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
isdn switch-type basic-ni1
!
interface Loopback0
ip address 10.3.1.1 255.255.0.0
!
interface Loopback1
ip address 14.3.3.3 255.255.255.0
!
interface Loopback2
ip address 14.4.4.4 255.255.255.0
!
interface Serial0
ip address 10.10.1.3 255.255.0.0
encapsulation frame-relay
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
frame-relay map ip 10.10.1.1 301 broadcast
frame-relay map ip 10.10.1.5 301 broadcast
frame-relay lmi-type ansi
!
interface Serial1
ip address 173.168.40.1 255.255.255.0
clockrate 2000000
!
interface TokenRing0
no ip address
shutdown
ring-speed 16
!
interface BRI0
ip address 2.0.0.3 255.0.0.0
encapsulation ppp
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
dialer map ip 2.0.0.6 name r6 broadcast 8358661
dialer-group 1
no fair-queue
ppp authentication pap
!
router ospf 100
redistribute static metric 500 metric-type 1
network 10.10.0.0 0.0.255.255 area 0
network 14.0.0.0 0.255.255.255 area 33
default-information originate metric 500 metric-type 1
area 33 range 14.0.0.0 255.0.0.0
!
router bgp 1
neighbor 10.10.1.1 remote-as 2
neighbor 10.10.1.1 ebgp-multihop 255
neighbor 10.10.1.1 update-source Loopback0
neighbor 173.168.40.2 remote-as 1
neighbor 173.168.40.2 update-source Loopback0
!
ip classless
ip route 0.0.0.0 0.0.0.0 173.168.40.2
ip bgp-community new-format
!
dialer-list 1 protocol ip permit
privilege exec level 10 clear
!
line con 0
exec-timeout 0 0
privilege level 15
password cisco
line aux 0
line vty 0 4
login
!
end
R6
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r6
!
enable password cisco
!
username r3 password 0 cisco
username r6 password 0 cisco
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
isdn switch-type basic-ni1
!
interface Serial0
ip address 12.2.1.1 255.255.0.0
ip ospf message-digest-key 1 md5 cisco
bandwidth 2000
no fair-queue
clockrate 2000000
!
interface Serial1
no ip address
shutdown
!
interface TokenRing0
ip address 11.1.1.6 255.255.0.0
ring-speed 16
!
interface BRI0
ip address 2.0.0.6 255.0.0.0
encapsulation ppp
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
dialer map ip 2.0.0.3 name r3 broadcast 8358662
dialer-group 1
no fair-queue
ppp authentication pap
!
router ospf 101
network 12.2.0.0 0.0.255.255 area 0
default-information originate always metric 20
area 0 authentication message-digest
!
router bgp 3
no synchronization
redistribute ospf 101 match internal external 1 external 2
neighbor 11.1.1.5 remote-as 2
neighbor 11.1.1.5 route-map localpref in
neighbor 12.2.1.2 remote-as 3
neighbor 12.2.1.2 password cisco
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 11.1.1.5
ip route 2.0.0.3 255.255.255.255 BRI0
ip bgp-community new-format
route-map localpref permit 10
set local-preference 300
!
!
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
privilege level 15
password cisco
line aux 0
line vty 0 4
login
!
end
Brian
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:26 GMT-3