From: Ron.Fuller@xxxxxx
Date: Tue Aug 15 2000 - 21:09:59 GMT-3
Here's an example from my terminal server where I am doing the exact same
thing. You might want to look at the following URL as well to see where
this stuff came from:
privilege exec level 1 clear line
privilege exec level 1 clear
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur_r/
srprt5/srpass.htm#4855
Watch the word wrap!
HTH.
Ron Fuller, CCIE #5851, CCDP, CCNP-ATM, CCNP-Security, MCNE
3X Corporation
rfuller@3x.com
Andy Singh
<asingh@slamdunknet To: "'ccielab@groupstudy.com
'"
works.com> <ccielab@groupstudy.com>
Sent by: cc:
nobody@groupstudy.c Subject: enable mode command
om
08/15/00 07:25 PM
Please respond to
Andy Singh
Is there a way allow some1 to use "clear line" command without giving them
the enable password.
any pointers/configs be appreciated.
andy singh
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:26 GMT-3