From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Aug 15 2000 - 10:44:17 GMT-3
John,
This e-mail, along with your previous one where it appeared the router
config was blank, indicates someone is changing your config register. Go
into config mode and enter: config-register 0x2102 It won't take effect
until the router is reloaded.
Brian
On Mon, 14 Aug 2000, qq wrote:
> hi,
> r1-----r2
>
> r1 is a 2501 , and r2 is a 2509, they are connected by asyn lines. i use r
everse telnet to control r1, now the r1's console speed is set to 1200 bits, n
ot 9600bits, how to change the termal line speed ar r2 , so that i can control
r1.
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:26 GMT-3