From: Matt Lachberg 3 (Cisco@xxxxxxxxxxxxxx)
Date: Mon Aug 14 2000 - 16:25:06 GMT-3
Thanks! I thought I worded my questions wrong but you nailed it, also, I
think when you typed in your CCIE # (congrats by the way) you messed up the
Consultant underneath, unless you want "Conultant" :).
Matthew Lachberg, CCNP, CCDP, MSCE
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Earl Aboytes
Sent: Tuesday, August 15, 2000 12:06 AM
To: Matt Lachberg 3; ccielab@groupstudy.com
Subject: RE: bridge question
When you turn on dlsw it enables irb.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes CCIE #6097
Senior Technical Conultant
GTE Managed Solutions
805-381-8817
earl.aboytes@verizon.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Matt
Lachberg 3
Sent: Monday, August 14, 2000 11:19 AM
To: ccielab@groupstudy.com
Subject: FW: bridge question
Theoretically, why don't you need to enable crb with dlsw+. Or does the
enabling dlsw+ somehow create the bridging / routing capability in the
router?
Matthew Lachberg, CCNP, CCDP, MSCE
-----Original Message-----
From: Simon Baxter [mailto:Simon.Baxter@au.logical.com]
Sent: Monday, August 14, 2000 11:02 PM
To: Cisco@datastreet.com; ccielab@groupstudy.com
Subject: RE: bridge question
It will enable the ieee spanning tree protocol and enable bridging on the
ethernet. If you're routing IP somewhere else on the box you'll need to run
concurrent routing and bridging and define ip as a bridged protocol. This
will be the same for any other routable protocols (protocols with a layer 3
structure).
In the most basic sense, yes, your config will enable bridging.
-----Original Message-----
From: Cisco@datastreet.com [mailto:Cisco@datastreet.com]
Sent: Tuesday, August 15, 2000 2:36 AM
To: ccielab@groupstudy.com
Subject: bridge question
Will this configuration bridge on Ethernet 0 or must I add "no ip routing"
globally in order to enable bridging?
interface ethernet 0
no ip address
bridge-group 1
!
bridge-group 1 protocol ieee
Matthew Lachberg, CCNP, CCDP, MSCE
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:25 GMT-3